|
Velvet Feather Kit Information:
Mallard Duck Head Flocking Kit |
Mallard Duck Head, Tail & Highlights Kit |
Goose Head Flocking Kit |
Goose Kit Head, Tail & Highlights Kit |
Mallard: Complete Body Flock Kit
Applicator bottles & brushes included,
but not shown.
Click Pic for larger version. |
NEW : Fully Flock Mallard Kits:"
7 Flock colors and 5 Glue Colors.
Cover the entire decoy with flocking.
Includes the bright blue wing color accent too.
Does 1 dozen standard decoys, plus ??.
Since manufactures vary the size of their decoys, no guarantees can be made as to how many decoys kit will do. However there should be adequate materials to surface treat up to the magnum size decoy, depending upon application techniques. |
Simple 4-step* process: makes
your decoys look like stuffers (Decoys NOT included). See specific
steps on the information page for Velvet Feathers.
*Note: If your decoys have never been painted before or have new
bare unpainted plastic (heads), you may have to take another easy
step to prepare the surface to accept any decoy finish.
Complete Kits include: Shown above.
Fibers and applicator bottle, glue-colored to match the fibers
(black, green and white), brush(es), sandpaper and detailed
instructions.
Basic Kits include: Only fibers, glue & instructions.
- Custom high grade fibers and our own 'custom glue' designed
for decoys, the outdoors, and cold weather.
- Fibers give the right color, depth, and texture for realism.
- Special high polymer glue, that is water cleanup. No solvents
needed:
- Apply the fibers within 10 minutes. Tack set in 2 hours.
- Ready to hunt 24hrs.
- Excellent adhesion.
- Flexes with plastic due to temperature changes and use.
- Will not check or crack like contact cements or other glues.
- Non-toxic and environmentally friendly.
- No fumes, solvents, or special equipment needed. Those little
silver cans have user warnings and require ventilation, gloves,
masks, etc...
- Easy to use and no fuss clean up.
- Water cleans up before the glue sets. Keep brushes in water during use.
- Rugged.
- Proven to stand up to a full season of daily guiding (little touch
up needed at the end of the season).
- Extremely water resistant and durable once cured.
- So durable we haven't figured out how to remove the glue once it is applied.
- Highlight kits all include additional white glue to be used
with white fibers to keep the color 'stark white'.
- Do not Freeze. Store in moderate room temperature.
Touch up: After a full season of everyday hunting, areas that
have rubbed against trailer sides or other other decoys may be
slightly worn.
How easy? If you can paint door trim...you can do the VF Kit!
When needed, touch up is very easy. Do the needed spots, or apply another total application.:
- Clean your decoys.
The easiest way is to use a garden hose and spray the dirt off. Use
a light brush, if needed.
- Allow decoys to dry.
- Apply glue to the worn/bare spots.
- Apply fibers immediately.
- Allow to dry overnight.
Or the whole surface can be re-done. Apply a thin coat of glue,
then fibers to the entire area. This will give greater uniformity
for larger areas that need to be redone.
|
| |
|
